Product info
Certificates
News
Job
About us
Contact
Danish

Bars
Sheets
Tubes
Fittings
Service Centre

Bars
- Round
  - Cold drawn
  - Centerless Ground
  - Peeled
    - EN 1.4410
    - EN 1.4460
    - EN 1.4462
    - EN 1.4404
    - EN 1.4057
    - EN 1.4301/4307
    - EN 1.4305
- Flat
  - Hot rolled and pickled
    - EN 1.4404
    - EN 1.4301/4307
  - Cut from sheet
- Hexagon
- Square
  - Valset/Bejdset
    - EN 1.4404
    - EN 1.4301/1.4307
  - Koldtrukket
- Angle
  - EN 1.4404
  - EN 1.4301/4307
- Threaded
  - A4 / 316
  - A2 / 304
- Reinforcement
  - EN 1.4406
Sheets
- Brushed / Scotch Brite
- Polished
- Bright annealed
- Cold rolled 2B
  - EN 1.4404
  - EN 1.4301/4307
- Cold rolled 2B w/ folie
  - EN 1.4404
  - EN 1.4301/4307
- Hot rolled
  - EN 1.4462 Duplex
  - EN 1.4404
  - EN 1.4301/4307
- Tear plate
Tubes
- Seamless tubes
  - EN 1.4404
  - EN 1.4301/4307
- Tubes surplus goods
- Welded tubes
- Decoration tubes
- Dairy tubes
- Box sections
- Hollow bars
  - EN 1.4404
  - EN 1.4301/4307
Fittings
- Threaded, 20 bar
- Threaded, 40-100 bar, PED-approved
- Butt weld
- Dairy
  - Elbow 90 dg
  - Elbow, long radius
  - Elbow 45 dg
  - Elbow 180 dg
  - Reducer konc.
  - Reducer exc.
    - Slebet
    - Matt
    - Pickled
  - T-bend
  - Double T-bend
  - Tee long
  - Tee short
  - Tee reduced
  - X-piece
  - Cap
  - Hose nozzle
  - Ball valve
  - MS Butterfly valve
  - MS Gasket for Butterfly valve
- Unions & Clamps
  - Spanner
  - DS union parts
  - SMS union parts
  - DIN 11851 union parts + SMS / ISO
  - RJT union parts
  - IDF union parts
  - DIN 11864-1 / DIN 11853-3 union parts
    - Nut F - AISI 304
    - Nut F - AISI 316L
    - Male part GS, long, DIN 11864-1
    - Liner BS, long, DIN 11864-1
    - Male part GS, short, DIN 11853-1
    - Liner BS, short, DIN 11853-1
    - Blind BBS
  - DIN 11864-2 / DIN11853-2 flange parts
    - Nut flange NF - long, DIN 11864-2
    - Liner flange BF - long, DIN 11864-2
    - Nut flange NF - short, DIN 11853-2
    - Liner flange BF - short, DIN 11853-2
    - Bolt set
    - Blind Nut flange w/ O-ring groove
    - Blind Liner flange BBF
  - DIN 11864-3 / DIN 11853-3 clamp parts
    - Clamp Nut NKS - long, DIN 11864-3
    - Clamp Liner BKS - long, DIN 11864-3
    - Blind Clamp Nut BNKS
    - Blind Clamp Liner BBKS
  - DIN 11864 / DIN 11853 O-ring
    - DIN / 13,0-154,0 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
    - ASME / 25,4-101,6 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
    - ISO / 13,5-114,3 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
  - Clampring Type S Advanced Couplings
  - Clampring Type SH Advanced Couplings
  - Clampring Type SSH Advanced Couplings
  - Clampring 13GH
  - Clampring 13GH w/ 13MHH-14 wing nut
  - Clampring 13EU, AISI 316
  - Clampring 3A-13MHHM heavy double pin
  - Hex Nut for Clamp
  - 13MHH-14 wing nut for clamp
  - Clamp ferruler
  - Clamp ferruler, long
  - Clamp ferruler, reduced
  - Clamp gasket
  - Clamp blind
  - Clamp ferruler w/ Male BSP
  - Clamp ferruler w/ Female BSP
  - Clamp ferruler w/ Hose
- Flanges
- Ball valves
- Tube hangers
- Molytest
  - INOX moly test
- Fittings surplus goods

News

Sign up for our newsletter
Alloy surcharge
Product news
2020
This i our new Account Manager

Product news

Clampkraver til orbital svejsning

07 September 2021
Overblik over Unioner og Clamps

10 August 2021
Svejsekraver Type 37

22 June 2021
DIN 11864/ DIN 11853 unioner

22 June 2021
Unions for ISO sizes

27 March 2019
Flanges with reduced thickness

27 March 2019
Tube hanger with ½" socket

27 March 2019

INOX A/S

Boeletvej 7-17

8680 Ry

CVR. DK 87633411

KONTAKT

Telefon	+4586892211
Mail	inox@inox.dk

ÅBNINGSTIDER
Mo-Tu 08.00 – 16.00
Friday 08.00 – 14.30

News
Contact
Valbruna Group
Terms and Conditions

Bars
- Round
  - Cold drawn
  - Centerless Ground
  - Peeled
    - EN 1.4410
    - EN 1.4460
    - EN 1.4462
    - EN 1.4404
    - EN 1.4057
    - EN 1.4301/4307
    - EN 1.4305
- Flat
  - Hot rolled and pickled
    - EN 1.4404
    - EN 1.4301/4307
  - Cut from sheet
- Hexagon
- Square
  - Valset/Bejdset
    - EN 1.4404
    - EN 1.4301/1.4307
  - Koldtrukket
- Angle
  - EN 1.4404
  - EN 1.4301/4307
- Threaded
  - A4 / 316
  - A2 / 304
- Reinforcement
  - EN 1.4406
Sheets
- Brushed / Scotch Brite
- Polished
- Bright annealed
- Cold rolled 2B
  - EN 1.4404
  - EN 1.4301/4307
- Cold rolled 2B w/ folie
  - EN 1.4404
  - EN 1.4301/4307
- Hot rolled
  - EN 1.4462 Duplex
  - EN 1.4404
  - EN 1.4301/4307
- Tear plate
Tubes
- Seamless tubes
  - EN 1.4404
  - EN 1.4301/4307
- Tubes surplus goods
- Welded tubes
- Decoration tubes
- Dairy tubes
- Box sections
- Hollow bars
  - EN 1.4404
  - EN 1.4301/4307
Fittings
- Threaded, 20 bar
- Threaded, 40-100 bar, PED-approved
- Butt weld
- Dairy
  - Elbow 90 dg
  - Elbow, long radius
  - Elbow 45 dg
  - Elbow 180 dg
  - Reducer konc.
  - Reducer exc.
    - Slebet
    - Matt
    - Pickled
  - T-bend
  - Double T-bend
  - Tee long
  - Tee short
  - Tee reduced
  - X-piece
  - Cap
  - Hose nozzle
  - Ball valve
  - MS Butterfly valve
  - MS Gasket for Butterfly valve
- Unions & Clamps
  - Spanner
  - DS union parts
  - SMS union parts
  - DIN 11851 union parts + SMS / ISO
  - RJT union parts
  - IDF union parts
  - DIN 11864-1 / DIN 11853-3 union parts
    - Nut F - AISI 304
    - Nut F - AISI 316L
    - Male part GS, long, DIN 11864-1
    - Liner BS, long, DIN 11864-1
    - Male part GS, short, DIN 11853-1
    - Liner BS, short, DIN 11853-1
    - Blind BBS
  - DIN 11864-2 / DIN11853-2 flange parts
    - Nut flange NF - long, DIN 11864-2
    - Liner flange BF - long, DIN 11864-2
    - Nut flange NF - short, DIN 11853-2
    - Liner flange BF - short, DIN 11853-2
    - Bolt set
    - Blind Nut flange w/ O-ring groove
    - Blind Liner flange BBF
  - DIN 11864-3 / DIN 11853-3 clamp parts
    - Clamp Nut NKS - long, DIN 11864-3
    - Clamp Liner BKS - long, DIN 11864-3
    - Blind Clamp Nut BNKS
    - Blind Clamp Liner BBKS
  - DIN 11864 / DIN 11853 O-ring
    - DIN / 13,0-154,0 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
    - ASME / 25,4-101,6 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
    - ISO / 13,5-114,3 mm
      - EPDM
      - Viton (FKM)
      - H-NBR
  - Clampring Type S Advanced Couplings
  - Clampring Type SH Advanced Couplings
  - Clampring Type SSH Advanced Couplings
  - Clampring 13GH
  - Clampring 13GH w/ 13MHH-14 wing nut
  - Clampring 13EU, AISI 316
  - Clampring 3A-13MHHM heavy double pin
  - Hex Nut for Clamp
  - 13MHH-14 wing nut for clamp
  - Clamp ferruler
  - Clamp ferruler, long
  - Clamp ferruler, reduced
  - Clamp gasket
  - Clamp blind
  - Clamp ferruler w/ Male BSP
  - Clamp ferruler w/ Female BSP
  - Clamp ferruler w/ Hose
- Flanges
- Ball valves
- Tube hangers
- Molytest
  - INOX moly test
- Fittings surplus goods
Service Centre
Products
Search for certificates
Jobs
About us
News
Contact
- Employees
Valbruna Group
Terms and conditions of sale and delivery
Beskyttelse af identitet
Brugsbetingelser
Request log-in to webshop
Bestil katalog

Product info
Certificates
News
Job
About us
Contact
Danish