Product info
Certificates
Alloy surcharge
News
Job
About us
Contact
Danish
Bars
Sheets
Tubes
Fittings
Service Centre
{{ result.Number }}
Der forekom en fejl under søgningen
Special Alloys
Round
Peeled
Cold drawn
Centerless Ground
Flat
Hot rolled and pickled
Cut from sheet
Cut from sheet, polished
Cold drawn
Hexacon
Square
Angle
Threaded
Reinforcement
Cold rolled 2B
Cold rolled 2B w/ folie
Brushed
Polished
Bright annealed
Hot rolled
Tear plate
Patterned
Box sections
Box sections, mill finish
Box sections, polished
Welded tubes
Dairy tubes
Seamless tubes
Hollow bars
Decoration tubes
Pharma tubes
Threaded, 20-40 bar
Socket
Half socket
Welding nipple
Barrel nipple
Barrel nipple, close
Nipple w/ par. thread
Hex cap
Hex nipple
Hex nipple reducing
Hex bushing
Red. Socket Nipple
Socket reducing
Angle F/F 90 dg
Bracket Elbow 90 dg F/F
Angle 90 reduced F/F
Angle F/M 90 dg
Angle F/F 45 dg
Angle F/M 45 dg
Tee
Tee reduced
Cross
Y-piece
Elbow 90 dg
Hex nut
Square plug
Hex plug w/ taper thread
DIN 910 plug w/ par. thread
DIN 906 plug
Hex hose nipple
Female Hose Nipple, hexagon
Hose nipple w/ thread
Hose nipple w/ butt weld
Union F/F, conical seal
Union F/F, flat seal PTFE
Union F/M, conical seal
Union F/M, flat seal PTFE
Union M/M, conical seal
Union M/M, flat seal PTFE
Union, butt weld, conical seal
Union, butt weld, flat seal PTFE
Union F/BW, conical seal
Union M/BW, conical seal
Angle Union F/M, conical
Angle Union F/M, flat PTFE seal
Angle Union F/F, conical
Angle Union F/F, flat PTFE seal
Threaded, 20-40 bar, NPT
Socket, NPT
Socket reducing, NPT
Welding nipple, NPT
Barrel nipple, NPT
Angle F/F 90 dg, NPT
Angle F/M 90 dg, NPT
Tee, NPT
Hex nipple, NPT
Hex nipple reducing, NPT
Hex bushing, NPT
Hex plug, NPT
Square plug, NPT
Hex cap, NPT
Union F/F, NPT
Union F/M, NPT
Hex hose nipple, NPT
Adaptor, Female NPT / Male BSP
Adaptor, Female BSP / Male NPT
Threaded, 40-100 bar, NORDS
NORDS Socket
NORDS Half Socket
NORDS Welding nipple
NORDS Barrel nipple
NORDS Hex cap
NORDS Hex nipple
NORDS Hex nipple reducing
NORDS Hex bushing
NORDS Socket reducing
NORDS Angle F/F
NORDS Angle F/M
NORDS Tee
NORDS Hex Plug w/ taper thread
NORDS Hex Plug w/ par. thread
NORDS Square Plug
NORDS Hex nut
NORDS Union F/F, conical seal
NORDS Union F/F, flat seal PTFE
NORDS Union I/I w/ O-ring Viton
NORDS Union F/M, conical seal
NORDS Union F/M, flat seal PTFE
NORDS Union F/M w/ O-ring Viton
NORDS Union, butt weld, conical seal
NORDS Union, butt weld, flat seal PTFE
NORDS Nipple w/ par. thread
Butt weld
Elbow 90 dg
Elbow, long radius
Elbow 45 dg
Cap
Reducer conc.
Reducer ecc.
Tee, drawn
Tee, reduced
Tee, pressed
Collar
Flanges
Blind flange
Blind flange w/ reduced thickness
Flat welding flange
Flat Welding Flange w/ reduced thickness
Welding neck flange
Threaded flange
Loose flange
Loose flange w/reduced thickness
Loose flange, aluminum
Blind flange, aluminum
Loose flange, pressed
Blind flange, pressed
Welding ring w/ neck collar, Type 35
Flange gasket Universal, Aramid-NBR
Flange gasket, Grafite w/ 316L perforated plate
Flange gasket w/ steel core, EPDM
Flange gasket w/ steel core, NBR
Flange gasket PTFE, FDA approved
Flange gasket EPDM, FDA-approved
Tube hangers
Tube support no shaft
Tube support w/ short shaft
Tube support w/ long shaft
Tube support w/ 1/2" Socket
Pipe Clip from flat bar 304 Light
Pipe Clip from flat bar 316 Light
Pipe Clip from flat bar 304 Light w/ shaft
Pipe Clip from flat bar 316 Light w/ shaft
Pipe Clip from flat bar 304 Type SL
Pipe Clip from flat bar 316 Type SL
DIN 3567-A Pipe Clip 304 w/ 3.1 cert
DIN 3567-A Pipe Clip 316 w/ 3.1 cert
Pipe Clip from flat bar 304 Light w/ thread
Dairy
Elbow 90 dg
Elbow, long radius
Elbow 45 dg
Elbow 180 dg
Reducer conc.
Reducer ecc.
T-bend
Double T-bend
Tee long
Tee short
Tee reduced
X-piece
Cap
Hose nozzle
Ball valve
MS Butterfly valve
Gasket for MS Butterfly valve
Pharma
Elbow 90 dg
Elbow 45 dg
Tee
Tee reduced
Reducer conc.
Reducer ecc.
Cap
Clamp ferruler
Clamp blind
ACL Type SO (13MHM)
ACL Type SH (13MHHM), AISI 316
ACL Type SSH (13MHP)
Safety Clamp SAF-SH w/ wing nut, AISI 316
Safety Clamp SAFX-SH w/ hex nut, AISI 316
Clamp gasket
Unions & Clamps
Spanner
DS union parts
DS nut
DS male part
DS liner
DS expansion male part
DS expansion liner
DS gasket
DS blind nut w/chain
DS blind
SMS union parts
SMS nut
SMS male part
SMS liner
SMS gasket
SMS blind nut w/chain
SMS blind
DIN 11851 union parts
DIN 11851 nut
DIN 11851 male part
DIN 11851 liner
DIN 11851 gasket
DIN 11851 blind nut
DIN 11851 blind
RJT union parts
RJT nut
RJT male part
RJT liner
RJT union gasket
IDF union parts
IDF nut
IDF male part
IDF liner
IDF union gasket
DIN 11864 / DIN 11853 union parts
Nut F - AISI 304
Nut F - AISI 316L
Male part GS, long, DIN 11864-1
Liner BS, long, DIN 11864-1
Male part GS, short, DIN 11853-1
Liner BS, short, DIN 11853-1
DIN 11864 / DIN 11853 O-ring
Blind BBS
DIN 11864 / DIN11853 flange parts
Nut flange NF - long, DIN 11864-2
Liner flange BF - long, DIN 11864-2
Nut flange NF - short, DIN 11853-2
Liner flange BF - short, DIN 11853-2
DIN 11864 / DIN 11853 O-ring
Bolt set
Blind Nut flange BNF w/ O-ring groove
Blind Liner flange BBF
DIN 11864 / DIN 11853 clamp parts
Clamp Nut NKS - long, DIN 11864-3
Clamp Liner BKS - long, DIN 11864-3
Clamp Nut NKS - short, DIN 11853-3
Clamp Liner BKS - short, DIN 11853-3
DIN 11864 / DIN 11853 O-ring
Blind Clamp Nut BNKS
Blind Clamp Liner BBKS
DIN 11864 / DIN 11853 O-ring
ACL Type SO (13MHM)
ACL Type SH (13MHHM), AISI 316
ACL Type SSH (13MHP)
Clampring 13GH (13MHM)
Clampring 13GH w/ 13MHH-14 wing nut
Clampring 13EU (13MHMM), AISI 316
Clampring 3A-13MHHM heavy double pin
Hex Nut for Clamp
13MHH-14 wing nut for clamp
Safety Clamp SAF-SH w/ wing nut, AISI 316
Safety Clamp SAFX-SH w/ hex nut, AISI 316
Clamp ferruler
Clamp ferruler, PED-approved
Clamp ferruler, long
Clamp ferruler, reduced
Clamp gasket
Clamp blind
Clamp ferruler w/ Male BSP
Clamp ferruler w/ Female BSP
Clamp ferruler w/ Hose
Orifice plate clamp gasket
Mesh clamp gasket
Ball valves
1 piece
2 piece
3 piece w/ thread
3 piece w/ butt weld
Moly test
No product found
Login
Username
Forgot password?
Go to Danish version
Sheets
Cold rolled 2B
Cold rolled 2B w/ folie
Brushed
Polished
Bright annealed
Hot rolled
Tear plate
Patterned
Tubes
Box sections
Box sections, mill finish
Box sections, polished
Welded tubes
Dairy tubes
Seamless tubes
Hollow bars
Decoration tubes
Pharma tubes
Bars
Special Alloys
Round
Peeled
Cold drawn
Centerless Ground
Flat
Hot rolled and pickled
Cut from sheet
Cut from sheet, polished
Cold drawn
Hexacon
Square
Angle
Threaded
Reinforcement
Fittings
Threaded, 20-40 bar
Socket
Half socket
Welding nipple
Barrel nipple
Barrel nipple, close
Nipple w/ par. thread
Hex cap
Hex nipple
Hex nipple reducing
Hex bushing
Red. Socket Nipple
Socket reducing
Angle F/F 90 dg
Bracket Elbow 90 dg F/F
Angle 90 reduced F/F
Angle F/M 90 dg
Angle F/F 45 dg
Angle F/M 45 dg
Tee
Tee reduced
Cross
Y-piece
Elbow 90 dg
Hex nut
Square plug
Hex plug w/ taper thread
DIN 910 plug w/ par. thread
DIN 906 plug
Hex hose nipple
Female Hose Nipple, hexagon
Hose nipple w/ thread
Hose nipple w/ butt weld
Union F/F, conical seal
Union F/F, flat seal PTFE
Union F/M, conical seal
Union F/M, flat seal PTFE
Union M/M, conical seal
Union M/M, flat seal PTFE
Union, butt weld, conical seal
Union, butt weld, flat seal PTFE
Union F/BW, conical seal
Union M/BW, conical seal
Angle Union F/M, conical
Angle Union F/M, flat PTFE seal
Angle Union F/F, conical
Angle Union F/F, flat PTFE seal
Threaded, 20-40 bar, NPT
Socket, NPT
Socket reducing, NPT
Welding nipple, NPT
Barrel nipple, NPT
Angle F/F 90 dg, NPT
Angle F/M 90 dg, NPT
Tee, NPT
Hex nipple, NPT
Hex nipple reducing, NPT
Hex bushing, NPT
Hex plug, NPT
Square plug, NPT
Hex cap, NPT
Union F/F, NPT
Union F/M, NPT
Hex hose nipple, NPT
Adaptor, Female NPT / Male BSP
Adaptor, Female BSP / Male NPT
Threaded, 40-100 bar, NORDS
NORDS Socket
NORDS Half Socket
NORDS Welding nipple
NORDS Barrel nipple
NORDS Hex cap
NORDS Hex nipple
NORDS Hex nipple reducing
NORDS Hex bushing
NORDS Socket reducing
NORDS Angle F/F
NORDS Angle F/M
NORDS Tee
NORDS Hex Plug w/ taper thread
NORDS Hex Plug w/ par. thread
NORDS Square Plug
NORDS Hex nut
NORDS Union F/F, conical seal
NORDS Union F/F, flat seal PTFE
NORDS Union I/I w/ O-ring Viton
NORDS Union F/M, conical seal
NORDS Union F/M, flat seal PTFE
NORDS Union F/M w/ O-ring Viton
NORDS Union, butt weld, conical seal
NORDS Union, butt weld, flat seal PTFE
NORDS Nipple w/ par. thread
Butt weld
Elbow 90 dg
Elbow, long radius
Elbow 45 dg
Cap
Reducer conc.
Reducer ecc.
Tee, drawn
Tee, reduced
Tee, pressed
Collar
Flanges
Blind flange
Blind flange w/ reduced thickness
Flat welding flange
Flat Welding Flange w/ reduced thickness
Welding neck flange
Threaded flange
Loose flange
Loose flange w/reduced thickness
Loose flange, aluminum
Blind flange, aluminum
Loose flange, pressed
Blind flange, pressed
Welding ring w/ neck collar, Type 35
Flange gasket Universal, Aramid-NBR
Flange gasket, Grafite w/ 316L perforated plate
Flange gasket w/ steel core, EPDM
Flange gasket w/ steel core, NBR
Flange gasket PTFE, FDA approved
Flange gasket EPDM, FDA-approved
Tube hangers
Tube support no shaft
Tube support w/ short shaft
Tube support w/ long shaft
Tube support w/ 1/2" Socket
Pipe Clip from flat bar 304 Light
Pipe Clip from flat bar 316 Light
Pipe Clip from flat bar 304 Light w/ shaft
Pipe Clip from flat bar 316 Light w/ shaft
Pipe Clip from flat bar 304 Type SL
Pipe Clip from flat bar 316 Type SL
DIN 3567-A Pipe Clip 304 w/ 3.1 cert
DIN 3567-A Pipe Clip 316 w/ 3.1 cert
Pipe Clip from flat bar 304 Light w/ thread
Dairy
Elbow 90 dg
Elbow, long radius
Elbow 45 dg
Elbow 180 dg
Reducer conc.
Reducer ecc.
T-bend
Double T-bend
Tee long
Tee short
Tee reduced
X-piece
Cap
Hose nozzle
Ball valve
MS Butterfly valve
Gasket for MS Butterfly valve
Pharma
Elbow 90 dg
Elbow 45 dg
Tee
Tee reduced
Reducer conc.
Reducer ecc.
Cap
Clamp ferruler
Clamp blind
ACL Type SO (13MHM)
ACL Type SH (13MHHM), AISI 316
ACL Type SSH (13MHP)
Safety Clamp SAF-SH w/ wing nut, AISI 316
Safety Clamp SAFX-SH w/ hex nut, AISI 316
Clamp gasket
Unions & Clamps
Spanner
DS union parts
SMS union parts
DIN 11851 union parts
RJT union parts
IDF union parts
DIN 11864 / DIN 11853 union parts
DIN 11864 / DIN11853 flange parts
DIN 11864 / DIN 11853 clamp parts
DIN 11864 / DIN 11853 O-ring
ACL Type SO (13MHM)
ACL Type SH (13MHHM), AISI 316
ACL Type SSH (13MHP)
Clampring 13GH (13MHM)
Clampring 13GH w/ 13MHH-14 wing nut
Clampring 13EU (13MHMM), AISI 316
Clampring 3A-13MHHM heavy double pin
Hex Nut for Clamp
13MHH-14 wing nut for clamp
Safety Clamp SAF-SH w/ wing nut, AISI 316
Safety Clamp SAFX-SH w/ hex nut, AISI 316
Clamp ferruler
Clamp ferruler, PED-approved
Clamp ferruler, long
Clamp ferruler, reduced
Clamp gasket
Clamp blind
Clamp ferruler w/ Male BSP
Clamp ferruler w/ Female BSP
Clamp ferruler w/ Hose
Orifice plate clamp gasket
Mesh clamp gasket
Ball valves
1 piece
2 piece
3 piece w/ thread
3 piece w/ butt weld
Moly test
Servicecenter
Product info
Certificates
Alloy surcharge
News
Job
About us
Contact
Danish
Create own product number
Add your own product number for:
Delete
Save
Create Favorites List
Name
Edit
Create Favorites List
Name
Edit
Add to favorite
Choose a favorites list or create a new one
Save to list
Create a new list
Save
Edit favorite list name
Enter new name
Save
